lemon and line

velocitek banner 12 16

c & c 30 banner ad 3 8

http://www.lymanmorse.com

http://www.mauriprosailing.com/

west system fp banner ad 1 15

vela banner 2 15

brooklin boatyard

seascape banner

rapido banner 2 red

farr 280 banner 9 4

weta banner 2 9

ner banner 3 24

pyi banner ad

c tech 9 22

hh banner green

karver ad 1 14

schwab tower ad 1 15

fish fp 6 15

http://www.crowleys.com/

http://www.dryuv.com

salona top banner

VX-One-550x150-Bnr_V3

Gunboat 5501 in Newport, RI.

oceanvolt  3 9 banner ad

tan 66 banner 4 4

southern banner 2 15

nke 5 6

fish top 6 9

b g 4 8 15

mauri 3 1 SA-Top-Rotate

mc 38 31 banner

Posts Tagged ‘Sean Langman’

Article Separator

Our pals at Doyle NZ check in with some of the sail tech behind Sean Langman’s Team Australia trimaran, which set a Sydney to Hobart record last week.

Having made the decision to try for the Sydney-Hobart record with his impressive Orma 60 Trimaran, Sean Langman approached Mike Sanderson at Doyle Sails to discuss the possibility of working with them on a new STRATIS offshore main. The sail had to be light, incredibly stable to endure the high loads, but also very rugged due to the rigours of offshore sailing. This would be the first time that Doyle had supplied sails to the yacht, and was an exciting new relationship. Time was short and so Team Australia and the Doyle Sails design team, led by Richard Bouzaid, worked tirelessly on every small detail to make sure that the sail was perfect for the attempt.

It was a great prospect for Doyle to be involved with and they worked with Sean and supported him on the resource side of the challenge. The result achieved was a fantastic outcome. “It was a really good effort by Sean and his team,” said Chris McMaster, MD of Doyle Sails NZ. “Sean has a lot of experience along that coastline and this, combined with the right boat, sails and crew, really paid off.” McMaster flew to Sydney before the passage to help set up the mainsail on the boat, just two days before they departed.

Sails designer Richard Bouzaid had this to say about the project. “We put in a lot of engineering study on how heavy the main should be and what was required for the loads on the boat. We ran a full FEA of the structure and found that our loads in certain areas to be particularly high. We set the fibre orientation to ensure there was no distortion as these sails go through quite a big twist variation,” said Bouzaid. “The sail has our standard GPx carbon compression structure which adds substantial stability to the membrane. The end result was an incredibly smooth and stable sail that remained that way throughout all the reefing scenarios and tests that racing challenges like this present.” Bouzaid concluded by saying, “ The sail performed as the modelling showed that it would, which is what we would expect these days.”

Full of praise for the STRATIS main, Sean Langman said: “Without doubt the new Doyle STRATIS offshore mainsail provided to Team Australia was key to our success. The new main was bent on three days prior to our team’s assault on the Sydney Hobart world mark. The main fitted beautifully and performed straight out of the bag. I am looking forward to further adding STRATIS to our wardrobe.”

 

March 1st, 2013 by admin

race the cape banner ad

swing keel ad.jpg_sml

salona side banner

adrena 6 20 ad

fish 3rd ad 6 9

Gunboat 60 sailing in Annapolis, MD.

nacra ad

fish side 6 17

ullman banner 41 15

LATIS-INTERNATIONAL-SA-AD-JUNE

predict 5 15

uk banner ad 3 15

hh banner purple

whitecap fp ad

ewol banner ad

ganz

front street ad 4 4

rbs banner ad

laser rc ad

madmarine

nautalytics

brock ad

http://www.camet.com/